Hermes 4 Modern
|Moc grzewcza [kw]||14|
|Szyba zwykła [mm]||płaska 560 x 350|
|Wysokość wkładu [mm]||850|
|Szerokość wkładu [mm]||685|
|Głębokość wkładu [mm]||540|
|Kubatura pomieszczeń ogrz. [m3]||120 - 150|
|Średnie zużycie opału max [kg/h]||4,5 - 5,5|
|Średnica komina [mm]||180|
|Średnica króćca zasysania powietrza [mm]||98|
Damper – by moving a special slider (left or right), you can affect on fireplace draft quantity. That has direct influence on the fuel (or wood) combustion rate. Due to that you can control the amount of energy and the time in which this energy is being produced in your insert.
Air intake – there is no possibility for the combustion process to occur without an air supply. Using the connector (90 mm) you may supply the air from the outside. The connector is placed upright under the insert.
Combustion process control – using the special slider placed in right lower part of the facade, you can adjust the flow of the air under the grate. Due to that you can control the speed of combustion process and the amount of produced energy.
Chamotte lining – chamotte plates offer very good accumulation of the energy, which is being given out to the surroundings after the burning is over. This very popular material is considered as a great combustion optimizer. It maintains optimal temperature in the furnace what helps to burn out all the gases. We use only high quality chamotte 3 mm thick.
Steel – to produce the fireplace we use a thick (4 mm) steel plate. It is characterized by very high quality and durability. Additionally the plate is being treated by abrasion, and covered with anti corrosive surface. Then it is being coated with a high temperature resistant paint. The fireplace insert prepared this way will certainly serve for years.
Warm surfaces – Our inserts and products are universal. We created them for those who want to use the fireplace for relaxation and recreation as well as for the people who will use it every day to heat the entire household. Therefore cartridges can be safely used either in warm surfaces (more HERE) and convection architecture. High temperatures in the insert do not affect negatively on fireplace functionality.
Double glazing – double glass mainly allows to reduce the heat emission to the outside. It is strongly recommended in case of small living rooms and little spaces in which furniture, RTV devices and other everyday objects are placed. In case of warm surfaces it is almost a necessity because due to the double glass we have the opportunity to accumulate additional energy, which goes to the accumulation mass. HERE You can read more about warm surfaces.
Adjustable feet – this feature allows to change hight of the insert in a range of 50 mm.
Protective fence – easy to install, elegant piece of equipment. Highly recommended to use to protect glass from damage.
Ash pan – in modern version of the insert, the ash pan is placed in the central part of the floor and access to it is possible after removing the iron grate.
Warranty – we give the 5 – year warranty on insert body. The grate, glass, gaskets and ceramic lining are not covered by warranty.